Home    About    Services    FAQ's  Contact   Payment


VISTA-20P Control Panel 


VISTA® Control Panel is a high capacity, feature-rich that lets you deliver more value with up to 48 zones of protection, Internet uploading/downloading, graphic keyboard support and dual partitions. VISTA-20P give you the ability to send alarm signals and upload/download via an internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet® Internet or 4G communicator can be installed in premises without TELCO lines. The panel's installation advantages, innovative benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.         


  • IP alarm reporting and uploading/downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4Gor GSMX4G

  • Supports four graphic touch-screens

  • Wireless keys can be programmed without using zones

  • Eight on=board wired zones 
    - 40 hardwired expansion zones
    - 40 wireless expansion zones

  • Two low current on-board trigger outputs

  • 100 Event Log viewable at system keypads with time/date stamp

  • 48 system user codes assignable to either position                                                                                                                              

  • Two independent partitions plus a common partition
    - Global Arming from any system keypad
    - Go to function to view or operate one partition from the other - Separate partition account numbers

  • Expandable to 48 zones when used with hardwired and/or wireless expanionmodules

  • 16 output
    - Relays (Model 4204 Relay Modules or 4229 Expansion Module)

  • Four Installer configurable zone types allows the installer to create custom zone types by assigning all zone attributes

  • Supports four-wire, and up to 16 two-wire smokes
    - Works with Sentrol CleanMe™ maintenance signal

  • Multiple actions on output devices depending on system "state"
    - Turns lights off when system arms
    - Turns the same light on when system disarms and flashes when system is in alarm condition

  • Built-in phone line cut monitor with programmable delay and annunciation options
    - Display on system keypads
    - Trigger local sounders and system bell

          Valuable End-User Features

  • Viewable on system keypads
    - Exit countdown
    - Time and date display and Event log

  • Auto keypad backlighting on entry

  • Key switch arming

  • Programming macro buttons and single-button arming

  • Supports a variety of wireless remote controls for single button arming

  • User Scheduling
    - Latchkey reports to pagers
    - Auto arm/disarm and "user access" time window

  • VIP Module allows system control from any touchtone phone

  • Chime by phone